Zinsser 2861 Use and Care Manual Page 1

Browse online or download Use and Care Manual for Unknown Zinsser 2861. Zinsser 2861 Use and Care Manual User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
TECHNICAL DATA SUG-10
SUREGRIP
®
SEAM & REPAIR ADHESIVE
Form: GDH-150
Rev.: 082613
1
.DESCRIPTION AND USES .
Rust-Oleum
®
SureGrip
®
Seam & Repair Adhesive is a
seam adhesive designed to seal down stubborn, curling,
loose edges, seams, tears and overlaps. It bonds strong
and tacks fast, yet strips easily without damaging walls.
SureGrip Sea & Repair Adhesive is not intended for use
where oil or grease is present or over silicone, wax-
coated surfaces or non-stick surfaces treated with
Teflon
®
, Tedlar
®
and similar non-stick coatings.
PERFORMANCE CHARACTERISTICS .
Seals sown loose seams, stubborn curling edges, tears
and overlaps
Grips in 10 seconds
Dries clear, non-staining
Easy water cleanup
.PRODUCTS .
SKU Container Size
02861 2-ounce tube
.PRODUCT APPLICATION .
APPLICATION
Use only when temperature is between 50-10F (10-
38°C). Adhesive is ready to use. Apply a thin coat under
edges. Make sure the adhesive gets back into areas
where the wallcovering starts to separate from the surface.
For separated seams, dampen the front and back of loose
wallcovering or border with a damp sponge. Wait 5
minutes before applying adhesive. Smooth until flat. If the
edges are curled, press down and hold for 10 seconds.
Avoid contact with the surface of embossed or delicate
wallcovering.
PRODUCT APPLICATION (cont.) .
DRY TIME
Drying time will vary depending on the wallcovering type,
temperature, ventilation and humidity in the room.
CLEAN-UP
Remove excess adhesive on or around the wallcovering or
border immediately with a clean damp sponge or cloth.
Blot dry with a soft towel. Additional effort may be required
if adhesive is allowed to contact the surface of embossed
or textured vinyl. Close tube tightly after each use.
TOOL CLEAN-UP
Clean tools with warm water.
STORAGE
Protect from freezing. Always keep the container tightly
closed and store in a cool dry place at temperatures
between 40-100°F (4-38°C). Normal storage life is one
year. The disposal of excess or left over product should
conform to local laws regarding water-based products.
Page view 0
1 2

Summary of Contents

Page 1 - SUREGRIP

TECHNICAL DATA SUG-10 SUREGRIP® SEAM & REPAIR ADHESIVE Form: GDH-150

Page 2

TECHNICAL DATA SUREGRIP® SEAM & REPAIR AHDESIVE Rust-Oleum Corporation Form: GDH-150 11 Hawthorn Parkway Phone: 877•385•8155

Comments to this Manuals

No comments